| molanis.com/forum - Tools for MetaTrader : The place to ask about the best expert advisor builder, expert advisor downloads, and expert advisor programming http://www.molanis.com/forum/ |
|
| Single Mode over Max Supported Mode Issue http://www.molanis.com/forum/viewtopic.php?f=8&t=5483 |
Page 1 of 1 |
| Author: | louisfrenchy [ Sat Nov 17, 2012 8:34 pm ] |
| Post subject: | Single Mode over Max Supported Mode Issue |
Hi, I've been creating custom indicators all of which returns either true or false, with a scaling factor so that it can be painted on the chart, next to price action. I am however seeing strange behaviors when I use all the supported 6 x modes. Not all the conditions of the custom indicator, if a particular mode meets a condition, shows on the chart. e.g with 6 modes created for a custom indicator I created, only the conditions from mode 4 to 5 shows. I went back to basics, and used one mode only for the custom indicator. Took mode 0 from the above, and put it alone, etc ..., and it shows on the chart while as part of the 6 modes bundle, it won't show. The conditions calculations are definitely correct, when compared with the actual indicators being used, when the condition is met. Has anyone experienced this issue and what are recommendations ? |
|
| Author: | louisfrenchy [ Sun Nov 18, 2012 4:30 am ] |
| Post subject: | Re: Single Mode over Max Supported Mode Issue |
found my issue on this matter. multi mode conditions met with the same scaling resulting with one painting over the other. The scaling needs to be adjusted adequately per mode conditions so that all can be made visible. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|